On the theme of substituting alternative wall finishes for plaster here is a large brick fireplace that looks well with a wood burning stove. Shown here, part finished, the brick construction is a structural part of the house with the essential offset from the main wall allowing the exposed brick to be part of the room behind. You were going to build a wall anyway so here a little bit of thought yields an expensive looking fireplace doubling up with a textural wall on the other side.
A few dimensional suggestions: The front buttresses are 225mm or one brick wide and thus the wood sections are 225mm square. The width between buttresses of 1.6m gives room for logs to be stacked by the stove and the 1.5m height between the floor and the main cross beam works well.
The Zampi (Italian: paws) profiles go like this:
Draw a centre line, mark the radius from the corner, draw a 30 degree angle from the corner, the big radius follows from the centre line intersection.
Double click for a closer look.
You might be going to use a flexible flue and this will need supporting above the stove. A steel ladder frame that can be slid forward and back a bit will make lining up the stack and the stove really easy. Between this and the stove fit a removable flue section to make cleaning easy.
A big stove like the 14kW Clearview shown here is best connected to water. To get a simple gravity feed put your tank on the other side of the wall and inside an airing cupboard. That’s another lot of plastering avoided and the core of your heating system done. BTW – I’m happy to advise on tanks and stoves and to supply them too. There’s a contact form below.
Oh, and here’s one I made earlier: Next time I’ll do the brick version.
This note follows on from;
Like what you’ve read? Find more essential reading on my e-book
‘Dream House – Down To The Details’ 101 things you should have thought of. here:-
Heating for your eco-house
For another example of straight thinking, this time on heating systems, have a look at:
…. and stoves and solar.
You really should get this right and there are many wrong turns where multiple energy sources are integrated.
More on this topic in LIST OF POSTS